Work Pc bad performance, Pci Slot Need Help

Ok I am going to post a copy and paste of what I was saying in forum on pcpitstop. Not much help there, even though the title says, well… you will see..
actual convo : http://forums.pcpitstop.com/index.php?showtopic=165060

<i>I am using a dell dimension 3100 with a 2.9 g single core
2 gigs pc 3200
I have a video card in this old beast I bought from staples
the video card is a verto pny 8400 pci (not pci-e)
when I take the bench tests without the card, I get a better score in 2d.
in fact , if i have the card in it takes about 45 seconds to perform that part of the test.
without the card it is instant.
Anyone have any old pci tips I can use to get this thing off th ground and moving faster?:
I really need the tips, since I am limited to this machine and use it for cad and flash and photoshop

I understand that.
But the 2d takes about 40 seconds to complete.
as apposed to less than a second like it used to do.
or as it does with my home pc. i’m just looking for some old school tweaks.

Bios only allows me to select auto or onboard. sadly enough.

I have two gig pc3200 (the machine is a bit dated but it’s a work pc)
when I am in cad, as I scroll down pages I actually see waves like as if I haven’t installed drivers
although it will allow me to crank video setting to 32 bit and 1280/1024 and i have the nvidia control panel
just like if if the drivers are installed. so it acts like there is no drivers while it shows drivers. have uninstalled and reinstalled and updated and updated . I think I’m at the latest 181.22 or something .

The thing acts worse than if I used onboard.
I mean while in adobe flash, in autodesk,cad, photoshop, or anything that uses video. I have probably 12 grand in software installed on this machine so moving to another is not foreseeable any time soon.
and yes I am a long time pc gamer so I know how to reduce start up programs and disable items as I run another that uses tons of resources.
as i remember there used to be a driver addon we used to use for agp slots called a “gart”. and if i remember correctly, there was something for pci slots, but of course it’s a dell pc so drivers and software are limited.

I am tempted to locate a modded bios for this and set it so I can turn that dang onboard gpu off.

and yes what finch was saying is perfectly correct. But for the 2d segment of the pcpitctop test (the part with the descending rings) to take 45+ seconds. Something is clearly wrong. I have taken this test on probably all of about 17 computers here in the office, some with radeon pci-e some radeon agp some with nvidia agp and or pci-e some with onboard gpu and the ring portion always takes less than a blink. never does it take it take 45+ seconds except on my machine with an 8400 gs pci card or on a machine that has no drivers yet (we recently added monitors to a few pcs for the ladies here to watch a buncha junk going on with our installers and tracking). i just know i am forgetting to do something.</i>
Sorry, but reallu I am that dang lazy, I wrote all that out once, and it seemed to hit the mark. but erm it fell on wrong ears, or at wrong pace.
Heck I dunno.

and yes, that is pci slot, not pci express.

REvived my Video card

[tags]512mb, 7600, benchmark, bfg, computer, gamer, gaming, gs, gt, make computer faster, nvidia, overclock, pcpitsop, performance, pny, results, speed up computer, test[/tags]

If you read my earlier post about my cat killing my video card.

You would pretty much assume that the card could not be saved. The card was so bad off it was like the “degause” button was stuck and well you pretty much assume the card was french fried. After 4 hours of wiping with a cotton swab and water then going back with window cleaner the very next day and doing this for about four hours only to give up and say “screw it” and start spraying the video card soaking it in glass cleaner even in the dvi socket and vga socket and s video socket, then going back with a paper towel and dabbing up the glass cleaner after it soaked for a minute then sprayed again and dabbed again. Final spray was a soaker of the entire card to rinse off remaining coffee residue. I dabbed after a two minute soak and drain , then went back and wiped with a paper towel and a hand full of cotton swabs until the card looked brand new. I mean under a microscope you would not find any dust, not one drop. I let the card sit for one more night, and a whole day of work.

Of course I tilted the card so that what ever fluid/liquid that was still in the card in any of the sockets would drain downward back the way it entered.

I dug out my BFG nvidia drivers, I put on fresh heatsink paste (the only heatsink paste I found was the cheap tube I had in my parts box) reinstalled my heatsink 01-30-08_1751.jpg

Snapped card back in, connected fans and power to card and booted up and installed the bfg nvidia drivers.

Went to pc pitstop and did my usual bencmark

here is a past work

here is after the clean up and reinstall

To see quick results, go to “compare” at the bottom.

here is the temporary card .