There are a few things to First get to know when you are wanting to upgrade your computer. First one is simple. Figure out if the computer is a manufactured or a home built d.i.y. (do it yourself) computer. If it’s a manufactured computer just locate the production number and go to the manufacture’s website and see what upgrades you can get. In many cases it is best to use the parts they offer, unless you know what you are doing. If you do not but want to go the least expensive route, get a techy friend to help you. In most cases it is all about locating the part numbers, such as mother board numbers to find out what type of ram and or video card. I am pretty sure a good Google search will lead you to a safe forum full of people with the same issue, or willing to help you.
If it’s a diy computer, you might want to follow the last two suggestions I made in the earlier paragraph. Locate motherboard part number. Locate motherboard part number here. Locate the video card part number and locate the memory part number. Do the same with the hard drive. I would start with just putting the motherboard’s part number in Google and let Google do the work for you. You should be able to find a large list of helpful links. Unless the model numbers consist of three of the letter X. In that case you will not find anything helpful. In 95% of model number searches you will find specifications, unless your part is really out dated. Five or more years old, might be an issue. With something that old, you would benefit more to just shop online for a low cost computer.
If you are wanting to be really up to date and want to do it yourself, I have to say, buy a barebone computer. stick around 199-299 dollars. locate a really recent dated video card that is compatible with your new machine, most decent video cards on pci-express X16 run anywhere from 50-500 dollars. Don’t be ashamed to buy the $50 one. It will only be slightly less superior to the $500 video card, and they both will be out dated at the same time.
hand full of words to remember when searching
DDR2
Pci-Express
Dual core or Quad core if you really want to up to date with the very most recent.
500 watt power suply.
Dual layer dvd
multi card reader.
A machine like that should run you from $450 – $5000. Shop smart on that. Remember there really is a small difference, Don’t listen to the kids that scream about the best. Really the decision is up to you and your needs and wants. Overkill is and always will be overkill and useless. But an undershot is money wasted.
If you are looking for a monitor to upgrade Here are more phrases.
Refresh rate (lower is better)
Lcd
Hdmi
Wide screen.
Fair range is $12 an inch. But you can pay more if you must. But if you can beat $12 an inch then you are in the good, as long as the refresh rate isn’t stupidly bad.
Good luck with this, if you have any questions, bring it on. I would love to try and help.