Category: cad

AutoCAD LT, 2 Months Review

Posted onAuthorTruXterLeave a comment

I have been using AutoCAD since version 2007.
From 2007 I moved up to 2011. From 2011, I moved up to 2013. From 2013 I moved to 2014. Where i have been sitting. Until January 2018,
In January my work partner got fed up with his 2011 version of AutoCAD and decided to move to the subscription 2018 AutoCAD lt.
We tested AutoCAD LT by opening all of the past files we had worked on and saw no problem. In fact, the files opened much faster and smoother.
Took me a couple weeks of having to get my work partner to convert files down to my version, me taking almost 3 minutes to open files on my Ryzen 1800x liquid cooled machine while his Pentium 4 was opening the same files in under 30 seconds. So I had to give in. The cost was low and the installation went quick and tech support was there for all of my questions before I made the actual purchase. So far I haven’t had to ask anything. Googled a couple times but that’s about it.

This Pros and cons will be between using an older full version of cad, and a new full support LT subscription version. Yes I understand how that is not a fair comparison but it is what I have.
If you are looking to change from a full version older version to the new subscription version and just want to do the LT plan to save a buck each year, here’s what I have found
Pros
Opens much faster.
Uses video card to speed up use- Acceleration far better than previous versions of full AutoCAD
Drawings look better Lines no longer have the odd zigzag that we have all come to accept.

Cons
Bcount is gone in LT
Multiline or MLINE is gone. You can no longer draw 2 inch or 8 inch walls without drawing each layer of Sheetrock separately.
EATTEXT – gone
Lisp – Gone

I find myself searching the internet trying to find alternative methods of doing my everyday stuff.
There is nothing that wont break the agreement with AutoCAD and getting my account canceled.

It looks as though I will have to give BricsCad, ProgeCAD and NanoCAD another run through to see what is missing where and how can I fix it.
Looks like AutoCAD LT turned out to be too little of of what I need for it to be of any use to me. Let’s see how the return policy (I was told about over the phone) about holds up.
I have to have all functions that full version AutoCAD 2013 had. I design fire alarm systems for fire alarm companies all around Texas. There is plenty of importance in me being able to draw everything I need to draw, use function of all attributes and block functions I have created over the years. I have a large collection of fire alarm tools, blocks, and symbols.

How to Make a Template in Autocad

Posted onAuthorTruXterLeave a comment

My Autocad templates are full of blocks that I have created and named to make the jobs that are repeated similarities, much easier and much more correct and uniform. I made these templates to simplify repeated drawings that have the exact same floor plans or layout and use the exact same equipment. The equipment is in separate blocks to be layed out per each individual locations unique requests. Maybe this is what you are looking for for your Autocad template.
For this “How to” I am using Autodesk Autocad 2014 in classic view.
If you have never made yourself a  template file for Autocad and have a reason that you may need to use the same design on multiple occasions and be able to pull up the default version of the Autocad design with ease. Then this might help you.
In the most simple way, right click any cad file and select “rename” and change the file from DWG to DWT. save. Then place the file into your templates folder.

In a more complex way but not real bad.
Open a cad file, then go to the menu area and select “save as”. Now name the file and below the area you name the file is “file type” select “dwt”. This will automatically place the new Template file in your templates folder when you select “save”.
cad-menu1

Now to load the template, you select file in top left of your screen, then select “new”. and in there will be your template file that you just created.
You can update the file as you go along, just be sure to select “dwt” each time you update the template.. And select “dwg” when you have designed something that will not be your default.

How to Create Blocks in Autocad

Posted onAuthorTruXterLeave a comment

Let’s start with creating  a simple block for this post.
Creating a block is a good way to to lock a set of items in one place to prevent deletion of useful items during editing. creating a block is also useful if you want to use that same block multiple times and call that item back up again with the quickest methods.

First you have to draw the item you want to be in a block.

Once the item is drawn, you can now highlight the item you just drew in cad, and then either right click and select “paste as block” or if you are on a newer version of autocad, you have to turn on the menu at the top of the window . once the menu is activated in Autocad, select “edit” in the droop down menu you will see “paste as block” select “paste as block”
pasteblockmenu

You have now created a block.

Now double click that block. and you will see  block editor open. The block will be highlighted in the list of blocks. The name should be random alphanumeric and symbols.
blockedit

Let’s name that block something you can remember.
Now at the top of that list there should be a space you can type in. The blocks name will be in that spot. Go ahead and copy that name and close the block editor.
Now in the command area type “rename” a new window should pop open.
renameblock

In the area that says “Old Name” paste in the name you copied, or you can scroll down the list of blocks on the right until you see the name of the block you want to rename. In the field below “Old Name” simply type in the new name of the block and press “Ok”.

You have now created and renamed a block in autocad.

you can easily call the item up with the “Insert command” or just type “i” and press enter.

Please let me know if this was informative enough, or simple enough or not.