Heatsink Upgrade to Cooler Master Hyper 212 Plus on AM3+ Review

  1. Home
  2. /
  3. amd
  4. /
  5. computer
  6. /
  7. computer upgrade
  8. /
  9. cpu
  10. /
  11. heatsink
  12. /
  13. i7
  14. /
  15. intel
  16. /
  17. processor
  18. /
  19. review
  20. /
  21. Heatsink Upgrade to Cooler Master Hyper 212 Plus on AM3+ Review

Heatsink Upgrade to Cooler Master Hyper 212 Plus on AM3+ Review

Posted in : amd, computer, computer upgrade, cpu, heatsink, i7, intel, processor, review on by : TruXter

The Girlfriend does a lot of video recording and editing internet companies. She runs an i7 processor and an Nvidia 970 video card with 16 gigs ram. She uses Camtasia software for a lot of her work. During the phase of compiling, we noticed sometimes her pc would crash, or lock up. After we installed speedfan we realized that she was hitting 180+ degrees so her intel was peaking high.
Until we could find her a new heatsink for her work horse, we tried to get by with my Athlon II X3 445 (Tri-core cpu) and my AM2 6 core which I bought for $5 at Epic A resell store.

This was a hard fact to face. The i7 is flat out a beast, and my AMD machines were completely useless for her. Except maybe recording. Rendering a video that she just compiled normally would have taken 10-17 minutes on her machine (when working right) ended up saying it would take 45 minutes on the AM2 and approximately 3 hours on the tri core.

So we took a trip to the computer store and bought the best heatsink they could advise, and what has the best/most reviews on line. We bought her computer a Cooler Master Hyper 212 EVO. Her temperature now stays in the 110s while compiling. Oddly there is no noticeable damage to the cpu or motherboard.

PcCooler Heatsink

PcCooler Heatsink

IMG_1218 My AMDs that I was proud to have had running for so little investment, were crushed in the dirt and now useless for every function in the house. Between her video work and my autoCAD work, it was time for an upgrade. So I (being the true AMD Fan I am) took a trip to the local computer store and brought home an AM3+ 8320 processor, 16 gigs of pny Anarchy 1866 ram, and an MSI 970A-G46 motherboard. of course a new case. Dropped my Geforce GTX460 Video card in and slapped on the factory heatsink, installed a spare power supply we had. Installed windows 7 and pushed the computer to her and said “well, try it out”.

We head back up to the computer parts store and buy a $21 heatsink.  Give it one test and find that it was time to take another trip to the computer store to buy the exact same heatsink we bought for her intel cpu. Within 1-2 minutes of rendering, the temperature of the processor jumped from the cool 98 degrees up  near 140 degrees and was climbing faster every second. The PCcooler heatsink is great for dissipating heat, at idle. but it was as if there was a threshold of like 115 degrees before it’s method of absorbing and dissipating heat become utterly useless. I will not throw it away. I will be installing it on another pc, but I’ll have to add an extra fan or something experimental.

Since I remember the instructions for the girlfriend’s computer came with instructions and spare parts for an AM3+ processor, I decided to search for the same heatsink.

I found the Cooler Master Hyper 212 Plus sounded like and looked like the same heatsink. Chased down the reviews and found everyone complaining about the install instructions but praising the cooling. Bought it for $35 and got free shipping.

DSC_0002It took all of about 10 minutes to install the new heatsink. I admit I cheated and watch this guy’s video though. I had to remove one side case fan for clearance, the processor heatsink was just too tall for my ENERMAX case.
Right away I went to rendering a video I compiled last night . When I tried to render the video last night, though the new computer made light work of the task, my cpu temperatures got to 145 degrees.
but now with the Cooler Master Hyper 212 Plus heatsink, re-rendering the same video took less than half the time it did last night and temperatures never exceeded 116 degrees.

The build is finally a success. and total cost under $600. and so far nothing runs slow, nothing hangs so far and it seems my autocad is flying. even using the knock off brands of cad design like bricsCAD, nanoCAD or ProgeCAD. They all run smooth with no pausing, no “thinking”.

Temperatures while in autocad never exceed 113 degrees.

I even ran a windows benchmark.
tempsidle
Sorry about the screenshot with in a screenshot. Only way I could think to get both scores up at once.

Review score for the Cooler Master Hyper 212 Plus
Ease of installation: 10/10
visible appeal: 10/10
effectiveness: 10/10
noise factor: 9/10

Final score: 10/10

Extra score = Instructions booklet usefulness: 1/10

Leave a Reply

Your email address will not be published. Required fields are marked *