Category: cooling

How to Fix GTAIV pc Memory leak

Posted onAuthorTruXter11 Comments

If you have a computer and plan to play  Grand Theft Auto iv  on pc.

People are  reading forums on how to resolve issues with their game. They are gathering information from people who do not know what they are talking about. I will help you with just a couple steps. First you have to understand that the person who claimed GTAIV pc has a memory leak, has no clue what he/she is talking about and should clearly be labeled the planets biggest idiot.  All planets need an idiot.

The fix, is the same fix for all games using a new architecture/engine. Here is the fix.

Go to the website for the manufacturer of your motherboard. Download all drivers for your motherboard.

Go to the website for the manufacturer of your video card.

Now before installing the new drivers, you must uninstall all the drivers you currently have installed.  I usually disabled the plug and play option in Control PanelAdministrative Toolsservices. Of course I do this on Vista because it keeps trying to install some crummy drivers  when I reboot after an uninstall. You really shouldn’t need that, but if you do, you know how.

Ok after the uninstall reboot your computer, and now install your drivers one by one, rebooting after each driver installed. On the final driver install, instead of rebooting, shut down your pc. When the pc is off, unplug the power to it. Clean up all the dust in all of your heatsinks (cpu,gpu,northbridge,south etc) clean your memory sticks. Remove all dust out of your pc. Make sure your air flow is heavy through your case.

The way I do that is, at the back of the pc where you see the 80 mm fans. There is like a grill around those. Since I don’t have a 2 year old kid in my house, I snip those grills out. This drops my temperature by about 2-5 degrees C . Here’s more on the subject.

And the last thing for you. DON’T OVERCLOCK YOUR MACHINE, unless you know what you are doing.

I am a regular user at the gtaforums  located at gtaforums.com.  100% of the memory leak complaints there, have been resolved with driver issues,heat issues, or the moron tried to overclock and did not want to face the fact that his computer was the issue, not the game.

In the end, this help post will get you playing Grand Theft Auto IV, that simple. The game works fine. Maintain your rig or go back to the console gaming. The cause is not overclocking it’s self, but poor overclocking could be a factor. If your machine is overclocked, set your o/c items back to default and give the game a go. If you can get the game running with your parts clocked to normal, gradually work your way back up in o/c until you reach a stable setting.

How? As if you are overclocking your video card, move each slider (depending on the tool you are using) up by 5mhz, test the game, move up 5 more, test the game and so on till you get a crash. After crash, move sliders back three. When it stables out, move forward one, if it crashes move it back one. and so on. Helpful posts

Same with bios / cmos settings with memory and cpu. Except not with sliders of course. Yes it is tedious but it resolves your issue.

Here is a lesson in how to adjust your  settings for smooth video play

And here is the whole help page from Rockstar.

Note: You must have Vista Service Pack 1 or Windows XP Service Pack 3 installed PRIOR to installing and running
Grand Theft Auto IV PC.
Right-click ‘My Computer –> Properties’ to see if you have the latest Service Packs installed, and if not check Windows Update and download before trying to install the game.

To help you understand that. It means that if you installed the latest service pack for your operating system  AFTER you installed GTAIV. It would be wise if you uninstall the game and delete all folders now. and reinstall the game.

Somewhere there was talk of resetting your registry but I haven’t had to study that. I will look into it if needed.  Yes it sounds like a hassle, but it does tell you on the box what the required service pack would be.  Fyi  windows xp 64 , you have to have service pack 2, or it will tell you it’s an incompatible operating system. 64 is not listed in the req area :-(

It does work though.

Computer Cooling

Posted onAuthorTruXter

Get more fans, reduce occupied space, tie wires back, increase air flow, and update heat paste.

Clean all dust out of all heatsinks and fans and off of any memory or any exposed chips.

Contrary to the past few years of opinions that say using some modified heat paste, and how it reduces temps by a drastic amount. I am currently using original heatsink that came with my CPU, and it has the factory tape on it. I have owned it for about 3 months now and done some pretty stiff gaming, mostly Crysis (demo) and Need For Speed Carbon and most wanted. My temperatures are amazing, but as I know with all things, it wont last. Or maybe it will. My current temperatures are as follows:

<taken from everest>

Temperatures
Motherboard 28 °C (82 °F)
CPU 22 °C (72 °F)
HDT722516DLAT80 31 °C (88 °F)
MAXTOR 6L080L4 23 °C (73 °F)

Cooling Fans
CPU 3013 RPM
Chassis 4116 RPM

Yes I know the Hittatchi is a little warmer than it could be, but in all the time I have messed with computers, I have never seen under 90 degrees for the CPU , other than right at boot. and that was typically around 89 degrees. I will be buying more of the heat tape that came with my Sempron if I can locate it.

Many people suggest that you use some paste/metal mix stuff. I have never been to keen on that junk, after it warms up for a long time and gets used a few times the stuff tends to harden, or become so tacky it’s like jb weld and could damage a few things when removing parts when cold.. Plus temps where always at least 8 degrees warmer than if I used the $3 white packets of paste. the major issue with the white stuff, well, you have to tend to it often and redo it atleast once every three months.

I try and not block any path of airflow. i have double checked airflow with a piece of scotch tape to see how it flaps and where it flaps.

The best cooling for a case involves a dremel, a drill, a metal file, 80 mm fan. and a brave brave soul. you use the dremel and a drill to punch an 80 mm hole at the top of the case facing upward and build yourself a fan there blowing air inward. the reason for inward is so you do not steal the air from the power supply cooling, that would easily increase the temp of ps unless you either make a tunnel or a blockade but would drop overall temp of case, now a tunnel makes great for making sure you blow air directly onto and across the motherboard.

Another suggestion is three 50mm fans across one of the CD-ROM bays but you have to build a frame for them.. which I will put on the site later… oh… and it is frickin’ loud.

Precautions For Building Computers

Posted onAuthorTruXter1 Comment

Use lots of overhead light. Once you have all the parts together, find a flat, smooth, clean, static-free surface. Make sure your clothes are not polyester or you stand a chance of building up buttloads of static and having a merciless discharge turning your junk into… well… junk.

I like using Gatorade lids to hold my screws and small parts in. Yeah Trailer Park Boys-ish, I know, but it works. Working above tile is good, also, so you can hear the small parts when they drop and kinda locate them easier by where the sound comes from. With the tower open and all parts scattered on the table, lower the motherboard in. Take small pin nails and set them through the mounting holes to mark your spot — should take like 6-9 of them depending on board size and tower abilities. Pull motherboard back out and try to not disturb the pin nails. Replace each nail with mounting studs, lower board in, and screw it down. Follow instructions in the manuals for motherboard and instructions from tower to set up power switches and USB connectors. you may sometimes need to split the end connector for the tower speaker so it fits the prongs. Tie back wires so they stay low and out of view.

Insert RAM, CPU, and heat sink. Simply put: Be gentle, be slow, bend no prongs, and scratch no boards

Set in all drives: CD-ROM / DVD / hard drive / floppy drive. Place the power supply in, and take the board connecting the wire strand and try and map the cleanest, least visible route. Then plug it in. Do not crack the motherboard (yes, it can happen)! Do the same with the drives. I tie them to the rack as I go down the line. Keep hard drives away from all magnets — even the case speaker magnet!

The Video card is done pretty much the same way as the RAM. The slit(s) in the card tells you which way it should face.

Get a good look at the inner case. All air paths need to be clear of anything — even wires. Now plan the path your air will flow and then look at your fans to see which direction the blades should face to achieve the airflow you planned.

Close the case, cross toes, plug in all devices for first boot, and press power button. Pray for BIOS/CMOS boot. Press delete and watch temperatures for about ten minutes or until you see that it is getting really hot.

More stuff to keep in mind.

Computer Component Removal

Posted onAuthorTruXter

For hardware removal, there are some simple rules you should follow.

  1. Unplug the PC first!
  2. Disconnect all wires coming from the power supply. Unscrew the four screws on the back of the power supply. Slide the power supply out of its case and set it aside.
  3. Disconnect all IDE cables and FDD cables and set them aside.
  4. Unscrew all screws from all drives and slide drives out and set them aside.
  5. Unscrew the fan on the heatsink. Unclasp the heatsink, wipe off heat paste, and set aside. Pull out CPU, wipe off paste, and set it with prongs facing up.
  6. Disconnect power and reset buttons, wires, and USB wires and case speaker wires. Tie them back.
  7. Unscrew the retaining screw for the video card. Undo locking mech (if you have AGP) and just slide the AGP card out.
  8. Push down on retaining clips on the memory cards and slide memory cards out and set aside.
  9. Unscrew retaining screws for the motherboard. Pull the motherboard out and set it aside.
  10. If you are just cleaning , I suggest you use canned air and blast every little inch in which you see dust (but do not be careless); remember, some items cannot take a beating, so be very careful.
  11. Just reverse the removal method when you are ready to reinstall.

my page

Computer Hardware Installation

Posted onAuthorTruXter

Installing hardware into a fresh PC is not that complicated, really.

If the prongs and the holes line up, read the part number and look it up and check compatibilities. Sometimes some hardware is too powerful, so checking specs is always a plus. 80% of the time they will work, but sometimes you can run into problems — like an AMD Athlon XP will not fit into an AMD Athlon 64 board. Same goes for AMD and Pentium. Prongs won’t line up.

The red wire always faces toward the power source. Look really close to the IDE cables (even the ones with the center top hole filled); you will notice there is a red dotted wire. Magnify it if you need to. Same with the FDD seven cable twist. FDD plugs in after the twist — never before.

PCI or AGP video cards just clip in. If it has a hook at the end, it is AGP. If not, then it is not. AGP will be the smaller slot.

Memory is just a clip in, also. Look up board manufacturers and part numbers and read through the specs for the board to know the minimum and maximum memory capabilities for your PC. (I have also looked this up more than… well, plenty of times and can easily do it. You can, too!)

With the CPU, once again, part numbers and manufacturer numbers are of wonderful help. Check board specs, check CPU specs, and always double check before the hard part, which is sliding the CPU into the dock. Squirt a thin layer of heat sink paste on the side facing away from the motherboard. Set the heatsink onto the CPU and center it before it actually touches (so you don’t smear off the heat paste while wiggling all around to position it). Clasp the retainer on either side. Screw the fan down to the heatsink. Plug the fan into the board.

With the power supply, make sure you have one strong enough to run your fan and that meets your CPU’s requirements. Make sure it is fastened really tightly; clip all wires into what ever hole they fit in (this is usually true). If you have one drive power connector that has no other splices or additional connectors on it, I would suggest you either use it for the master drive or you could plug your fans and lights into that connector.

With IDE and FDD cables, red goes toward the power source.

The use of a hot glue gun by splatting a tad at the clasps for most parts except the CPU is okay to prevent stuff from falling out of place.

Scroll to the bottom of my page if you want to make a donation and request further assistance. Any donation helps! If the problem is resolved, please pass this link on when you know of someone in need.